Aircraft Fuel Sample Tube Holder

prusaprinters

<p>This is a holder for an aircraft fuel sample tube, similar to the one sold by Sporty's Pilot and many other shops. The holder is attached to the aircraft structure with rivets or screws and the Fuel Sample tube snaps into place in the holder.</p><p>The only difference between the two versions is one has two snap retention clips and the other has a ring in place of the second retention clip. The version with the ring is better for vertical mounting situations. &nbsp;</p><p>Printing with a temperature and UV resistant materials are recommended. Nylon is a good example, ASA also work well. &nbsp;Print with the end on the bed to the layer orientation provides maximum strength as the clip section flexes when the sample tube is inserted or removed. I use supports to make sure the upper clip prints correctly.&nbsp;</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p><strong>Printer:&nbsp;</strong></p><p>Mk2.5s</p><h3>Custom Section</h3><p><img src="https://cdn.thingiverse.com/assets/f6/68/05/e2/bd/Fuel_Sample_Holder_clip_style.jpg"></p><p>&nbsp;</p><p>Category: Sport &amp; Outdoors</p>