Airbrush Paint Holder - Createx 2oz

thingiverse

##This printed for me in 13hrs 49min. Photos added, it passed my 90° hold test with flying colors. I rotate the model with paints in it and make sure the brim on the wells are deep enough to hold the bottles at 90°. And yes they did. ------- First photo is the proof of concept that "Part6" which is a single slot printed, will fit the paint bottle. ##(((****due to how my program outputs .stl files, you may need to scale it to 1000%))) - If you are unsure this design will work for you, print "part6" This was a 30 minute print on my printer. -------' I was tired of none of the paint holders on thingiverse fitting my brand airbrush paint. So I decided to make my own. I measured my bottles with a digital caliper, I designed and printed "part6" as a proof of concept. --2x3 is a 5hr and 29min print @10% infill and uses 103g ---3x5 is a 11hr and 49min Print time. I can try to shorten this by hollowing out the underside of the second and third row, but at 10% infill this is just at 225 grams This holder will fit Createx 2oz 60ml Opaque and Wickid Colors lines for sure. The 4030 Balancing Clear 2oz 60ml bottle is a different diamater. -I will create a single insert 3 deep to allow for this @36.5mm-diameter An additional holder wil be made for the 8oz/240ml 5618 airbrush cleaner bottles (3 deep) Please check back on the progress, I plan on making additional changes so this fits on my desk and rounds the corner, and also a peg board ##This holder will hold 2 Createx sized color 6packs. Opaque and Wickid Colors with space for 3 additional bottles. I will be working on holders for the other sizes that createx uses, but staying in the original foot print so they can be placed side by side. if this helps you, please consider tipping me, I will consider making this a free design when finished, but while I am still working on it, it is locked down.