Air Scrubber for an Ikea (TINGBY) based enclosure - Fuseholder Base

prusaprinters

<p>This is a fuse holder base for the "Air Scrubber for an Ikea (TINGBY) based enclosure". It requires the following fuse holder posted by sk8rjess and originally created by Erik Cederberg (<a href="https://www.youmagine.com/meduza">https://www.youmagine.com/meduza</a>) and made available under the Creative Commons Share Alike License:</p> <p><a href="https://www.thingiverse.com/thing:1787609">https://www.thingiverse.com/thing:1787609</a></p> <p>Regarding the fuseholder, please read the comments for that thing to decide if you want to use it or not - it was recommended to print the fuseholder in high temp fire retardant filament. An off the shelf fuseholder could alternatively be used with the original design posted below. In any case making or using this is at your own risk.</p> <p>The fuse holder is mounted in the base, it is not integrated into this thing, so the complete fuse holder from the above thing will be needed if you choose to use it.</p> <p>You can find more info and the other parts in the original thing here:</p> <p><a href="https://www.thingiverse.com/thing:3888020">https://www.thingiverse.com/thing:3888020</a></p> <p>I have printed an earlier version without the fuse holder, and also have printed sections of this to verify the fit of the fuse holder, but the exact model here has not been tested by me. There are 2 versions available, one with integrated supports and one without. The integrated supports were designed with the idea of using 0.2mm layer height. This is most easily printed in the vertical orientation (see pics).</p> <p>This will remain a work in progress, since I have printed my earlier version (without the fuse holder) and don't need another one. If you print one, please provide feedback, thanks!</p> Category: 3D Printer Accessories