Air Raid Siren - hand crank version 3 so it fits on the printer
thingiverse
Air Raid Siren Hand Crank Version 3 Modified for Printer Compatibility The original design can be found at https://www.thingiverse.com/thing:1568198. To print the parts, they must be broken down into individual components due to size constraints. The logo has been removed from the object to facilitate two-color printing. Required Components: * 4 x ZZ bearings, 5x16x5 mm (625) * 1 x ZZ bearing, 25x47x12 mm (6005) The total cost is under 10 euros. Printing Instructions: * Print all screws and small gears with 3 wall channels and 35% filling. * Print Rotor3 with high resolution, 0.1 mm layer height. * Assemble the following screws: + 3 x Schraube1 + 6 x Schraube2 + 1 x Schraube3 Installation Notes: * When installing Rotor3, pay close attention to its orientation. If the housing lid grinds against it, simply rotate the assembly 180 degrees. Assembly Adhesives Used: UHU ALLPLAST Special Glue.
With this file you will be able to print Air Raid Siren - hand crank version 3 so it fits on the printer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Air Raid Siren - hand crank version 3 so it fits on the printer.