Air Atomizing Nozzle

thingiverse

*** DISCLAIMER *** I am not responsible for anything that may happen to your compressor, plants, or other equipment connected to the use of this nozzle. You as the user take full responsibility upon yourself if you choose to use this digital design. This file is provided as is, without warranty of any kind. ****************** Currently I am running just a single nozzle per bin as the dual setup I think consumes more air than it is worth I think. Let me know your thoughts if you print one, would love to get some more feed back to make this more air efficient and possibly get it down to 30 PSI or so. There are 2 STL files as one has a hole through the collision cap to allow for some of the mist to be directed straight out while the rest is diverted to the sides. If you don't want the center stream print the one without the hole in the center. This is designed to be printed with a DLP/SLA resin printer. I print on a 20 degree angle and have had great success with that. Medium supports about 60-75% density. After print, I throw a little grease on the threads and run the nut on and off a couple times before I cure the print. Also cleaning the threads out of the liquid and air connectors is also good before UV curing. Designed with 1/4" Tube OD x 1/8 NPT Male threads on both the air and liquid connections. I have been running this around 70PSI on my regulator and about 5 second shots. If you find better combinations I would love to hear about them. More Discussion and videos over on reddit: http://t.ly/wXZU http://t.ly/lS2f