Aerogarden Washing Stand

thingiverse

Made specifically for the Aerogarden Harvest (6-plant), this foldable stand allows you to secure your plants while giving them a thorough wash. This way, you can prevent any freeloading plants from getting in the way. This stand is designed to be easily collapsed for convenient storage. # Instructions - Print 2x Legs. - You will need to print either 1x Base or 2x Base_Split if the base is too large for your printer. - In Base_Split, there are holes at the joints that can be used to pin them together if necessary. Fifteen gauge finishing nails work very well in this case. Any fastener with a diameter of .07" and a length just under .5" will also do the job. To secure the joint, apply superglue (CA glue) for PLA. - You'll need something to use as hinge pins. I used 15 gauge finishing nails by cutting off their ends and pressing them in by hand. - Assemble everything according to the photos and enjoy your fully functional stand. Note: This stand is intended solely as a helper during washing. Do not place the entire Aerogarden on top of it, as this can cause it to collapse unexpectedly.