AEGIS MEDICAL FACE SHIELD REMIX - W/ EXTENDED FOREHEAD

prusaprinters

<p>The Aegis Face Shield is the best design for mass production I have found after making a ton including the super nice and study Prusa V2 and V3. Its just that I can't make enough of those. It is a 32 minute print with a 0.8 Nozzle, 0.30 layer, at 75mm ps. It's durable as all hell and NO HOLE PUNCHES! Easy to replace contaminated masks. This is the original designer: <a href="https://www.thingiverse.com/thing:4238890">https://www.thingiverse.com/thing:4238890</a> , we have consulted a few times and here is my remix of that model and he has released a similar version. I have tested this one in PLA on a CR-10 and its perfect. This design is amazing and saves time, filament, costs, assembly time, and is easy to sanitize. Uses #16 easy to source rubber bands, 8.5x11 Transparency Films or Binder Covers (5-7mil). PLA has been awesome for it.</p> <p>The original design with the snap locking system is amazing, I only needed a more comfortable forehead pad so I had to make this one. All of the doctors and nurses complained of a pressure point on thier center forehead after and hour or so. Hopefully this is the solution. I did a crap job in tinker cad, if anyone can do a better one PLEASE DO. This is just something that is critical for long term wear 1 hour plus.</p> <p>Printed in PLA. Use 8.5x11 inch transparency or 5-7mil binder covers all available on Amazon, Walmart, Office Depot, or just ask a teacher, they will have some. See my video below for easy assembly and adjustment. Feel free to share it just don't make to much fun lol. I'm just trying to help.</p> <p>Assembly and adjustment video: <a href="https://youtu.be/mHc35-nuro0">https://youtu.be/mHc35-nuro0</a></p> <p>Make sure to do the first layer at 100% not any bigger or it'll be out of spec for the insertion of the film.</p> <h3>Print instructions</h3><p>Printer brand:<br/> Creality</p> <p>Printer:<br/> CR-10</p> <p>Rafts:<br/> No</p> <p>Supports:<br/> No</p> <p>Resolution:<br/> 0.8 nozzle or line width / 0.30 Layer</p> <p>Infill:<br/> 30</p> <p>Filament_brand:<br/> PLA Cheap</p> <p>Filament_color:<br/> Who cares</p> <p>Filament_material:<br/> PLA</p> <p>Notes:<br/> 75mm per second, turn on interior thin wall fill. 2 perimeter outlines. Prints in 32 minutes for one or a 300x300 CR-10 can do two at a time at 64 minutes.</p>