AEA HP MAX .35 .45 S45 Regular/Mini Barrel Band QUADRAIL

cults3d

Check out my handguard with free floating barrel at: https://cults3d.com/en/3d-model/tool/aea-handguard-m-lok-357-floating-barrel THERE'S SOME QUESTION ABOUT THE MEASUREMENTS OF THE 357 BARREL BANDS WHERE SOME PEOPLE REPORT A 2MM SPACE BETWEEN BARREL AND TANK AND SOME REPORT 2.9MM... I'VE ADDED BOTH. PRINT THE FIRST 5MM AND SEE IF IT FITS, IF NOT TRY THE OTHER AND PLEASE REPORT BACK TO ME SO I KNOW WHAT THE HELL IS GOING ON. Had to take out the STL for the .50 because I got the wrong measurements. So still don't know if the .45 also fits the .50 Check out the new cable clamps to go with this design: https://cults3d.com/en/3d-model/tool/picatinny-cable-clamps-cable-management You might need a half round and a round file to adjust and smooth the inside of the quad rail to make it slide all the way back (I did) as the clearance between the tank and barrel varies ever so slightly from front to back. I also need to make a second design to account for the pressure gauge on models with regulators (in the pictures the regulator plug is still installed on my gun, I just removed the pressure gauge). For those who want more railspace and protection for their barrel and air tank (for those who want the "light" version go to: https://cults3d.com/en/3d-model/tool/aea-hp-max-45-50-barrel-band-with-picatinny-rails) Also check the link above for instructions. Only difference being that this design uses 8 screws. Design is split in two parts for ease of printing on mainstream printers.