Adjustable Z Stop for the FT-5
thingiverse
This makes it easy to adjust the table level, with a switch holder modified from an open-source E-stop holder. The holder features a recess for solder pins and is extended to keep the adjustment screw shorter. Print Settings: Printer: Use either an FT 5 or FTi3. Rafts: It doesn't matter what type of rafts you use. Supports: Similarly, the supports are not crucial to this print. Resolution: The resolution must be set at .15. Infill: You will need to print at 100% infill. Notes: Adjusting the table level is easy with this setup. The switch holder was modified from an open-source E-stop holder and has a recess for solder pins, as well as being extended to shorten the adjustment screw. Printing at 100% PLA works well with a resolution of .15. You will need one 4 x 112 mm screw, one 4mm nut, two 4mm flat washers, two springs of your choice, one 3 x 20 mm screw, and one 3 x 28 mm screw, along with two 3mm nuts.
With this file you will be able to print Adjustable Z Stop for the FT-5 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Adjustable Z Stop for the FT-5.