Adjustable tablet holder for DJI Mavic PRO

thingiverse

Version Last updated: 7th March 2017 About I designed this holder because I needed one that fit my iPad Air perfectly. The basic idea was born when I saw a foldable tablet holder for the DJI MAVIC Ver.2 on Thingiverse (http://www.thingiverse.com/thing:1982834). What I really missed was a similar holder from Banggood, so I decided to make my own. My tabled holder is adjustable from 130 to 185mm, making it suitable for iPad Air and iPad mini too, as well as other great tablets and phones. Requirements Already printed Base and LockKey of this item: http://www.thingiverse.com/thing:1982834/ 1pcs M4x12mm HEX-head screw is required. 1pcs M5x25mm screw is needed. 1pcs M4 nut must be used. 1pcs M5 nut will also do the job. 1pcs M3x20mm screw can be employed. 1pcs M3x10mm screw will suffice. 2pcs M3 nut will complete the setup. 4pcs woodscrew 2.5x20mm are necessary. Print Settings Printer: Poseidon DUO is used. Rafts: No rafts were used. Supports: No supports were needed. Resolution: 0.2mm was chosen. Infill: 80% infill was selected. Notes: It's recommended to print with PLA. 1pcs base.STL must be printed. 1pcs slide.STL should also be printed. 1pcs screwhead.STL can be used. 1pcs arm.STL is required. 1pcs arm_mirrored.STL will do the job. 2pcs stopper.STL or 2pcs stopper_wide.STL can be used (depending on thickness of device with protective case). Alternatively, 2pcs stopper_small.STL can be printed for devices smaller than 166mm.