Adjustable Raspberry Pi camera mount

thingiverse

This is a versatile camer mount designed specifically for the raspberry pi camera version 2. It offers a wide range of motion and can be adjusted in every angle, with its height adjustable feature allowing it to move up and down along the x-axis. Cable clips are included and installed on the boom to prevent cables from dangling loose. # Materials Needed # ## What You Need to Copy This Design: ## 1x M3x50mm 1x M3x30mm 2x M3x15mm (Not required for the version without height adjust) 1x M3x8mm 4x M3 Nut 1x M2x16mm 1x M2 Nut Optional: M3 washers to distribute force evenly. ## What You Need to Print the Full Version: ## 1x Camera_boom (in your desired length), 1x Motor_attachment, 1x Height_rail 1x Bracket_extension, 1x Camera_turner, 1x Case_back_modified, 1x Case_front_under 3x Knob_for_nut, 3-6x Cableclip. ## Variant Without Height Adjust (Just Mount the Camera_turner Directly to the Boom): ## 1x Camera_boom (in your desired length), 1x Motor_attachment, 1x Camera_turner 1x Case_back_modified, 1x Case_front_under 1x Knob_for_nut, 3-6x Cableclip. I hope you enjoy this design and don't forget to share your creation! **Information:** The original camera case design was created by @j0mb13 and published under the Creative Commons - Attribution - Share Alike license. I modified the Case_back and added a small cable clasp. The Case_front_under is used as is. The other camera mount (Case_front_over) from his design can also be used if you prefer to have the camera facing upwards. Link to the original design: https://www.thingiverse.com/thing:3417079