Adjustable/lockable ball-joint phone holder for Prusa Connect camera

prusaprinters

Adjustable/lockable ball-joint phone holder for use as a camera mount for Prusa Connect. Fits to any 3030 extrusion, without the need of any dismantling to expose the extrusion ends.I made this for use with Prusa connect with my Prusa mini, but it should work with any 3030-extrusion. It may be fitted in multiple ways depending on your liking since the joints are adjustable and it mounts on any 3030-extrusion part. It may also be mounted on any flat surface using the “screw”-fixture with 4 x M4 Screws.There are a short and a long version of the joint available depending on wished mounting position/distance. In my mounting example i used:3 x “rod_short”4 x “screw_cap”4 x “ball”1 x “rod_double”and, of course, 1x of each:holder_*extrusion_*Everything prints without supports except the screw_cap which benefits from supports for build plate.I included a picture of the orientation in which I printed everything.If you print in PLA you may need to consider using a brim since theres only one perimiter for the bottom layer for some parts. I printed in PETG which worked very well since PETG sticks like h*ll. I used 80% rectilinear infill for extra strength.The “screw_cap” may be printed right side up as well but then, at least for me, need some extra work filing/sanding to get it to thread properly. Update: After some feedback I have updated some parts to v2 (*_v2-files) with a coarser thread (M9 instead of M6) to hopefully make the parts stronger. I haven't printed the new version my self since I didn't experience the problem with the print being to fragile. So please report back if there is a problem with the new version.Update 2: Added a screw fixture per request. It may be screwed to any flat surface using 4 x M4 screws. The dimensions are adjusted to fit an IKEA Lack leg but any surface larger than that will work.