Adjustable LED Light Arm for 10mm x 50m LED Strip Sections

thingiverse

This is an adjustable LED lamp capable of accommodating two sections of a 5050 LED strip, each measuring 10mm x 50mm (totaling 10mm x 100mm together), consisting of six LEDs. **Hardware Requirements**: To assemble this project, you will need two to three 12mm long M3 screws and two to three 2.2mm thick M3 nuts, depending on the desired number of points of articulation. Cheese head screws were used in this example. The mount attaches securely to the printer using the screw provided with the printer. **LED Arm Options**: Choose from two design options for the LED arm: Light-LED_Arm.stl or Light-LED_Arm-With_Angle_Connector.stl. If you select the former, you will also need to print Light-Angle_Connector.stl to attach to the connector arm, providing an additional point of articulation. **Connector Arm Options**: Select from two different patterns for the connector arm: a honeycomb or triangle design. **Knob Assembly**: Print the knobs separately from all other components. To complete this step, you will need to pause the print process at a certain point, insert M3 nuts, and then continue printing.