Adjustable LED Light Arm for 10mm x 50m LED Strip Sections

prusaprinters

<p>This is an adjustable LED lamp that is large enough to accommodate two sections of a 5050 LED strip that measure 10mm x 50mm each (totaling 10mm x 100mm together). This is six LEDs.</p> <p>Hardware: You will need two to three 12mm long M3 screws, and two to three 2.2mm thick M3 nuts (depending on the number of points of articulation you choose). I used cheese head screws. The mount attaches to the printer with the screw that came with the printer.</p> <p>LED Arm Options: There are two of these that you can choose to print from. Light-LED_Arm.stl requires you to print Light-Angle_Connector.stl to attach to the connector arm, and gives you an extra point of articulation. If you decide that you don't need this extra movement, you can simply print Light-LED_Arm-With_Angle_Connector.stl.</p> <p>Connector Arm Options: There are two of these that you can choose to print from: a honeycomb pattern or a triangle pattern.</p> <p>Knobs: Print the knobs separately from all other parts. You will need to pause the print part way through so that you can insert M3 nuts, and then continue the print.</p>