Adjustable iPhone&smartphone cat stand - Easy assembly, no tool needed
thingiverse
I designed this adjustable iPhone stand that is easy to assemble while still looking cute. You can adjust the angle in six different ways. The distance where the phone sits is seven millimeters. My iPhone and case together are about nine millimeters thick, and it fits just fine. I didn't include an extra ten-millimeter distance because that's unnecessary. If you want it, please let me know. Item dimensions: seventy-one wide by ninety deep by twelve point three high approximately. Please see the photos for assembly instructions. Print Settings: Printer: Prusa i3 Rafts: Yes Supports: Yes Resolution: 0.1 and 0.2 Infill: Fifty to seventy percent Notes: For printing angle plates and back plates, I recommend using brim unless you're very confident in your bed leveling. You'll need support under the pin on the smartphone stand's angle plate. I printed all parts at both 0.1 and 0.2 layer heights, and it worked either way, but if you want finer details, especially the cat figures on the base, I recommend printing at 0.1 layer height. Smartphone Stand Angle Plate: Brim: Yes Support: Yes (only for angle plate) Infill: Fifty percent Layer Height: 0.1 or 0.2 Adjustable iPhone Stand Base: Brim and Support: No Infill: Seventy percent Layer Height: 0.1 or 0.2 (0.1 is recommended)
With this file you will be able to print Adjustable iPhone&smartphone cat stand - Easy assembly, no tool needed with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Adjustable iPhone&smartphone cat stand - Easy assembly, no tool needed.