Adjustable Filament Spool Cradle Holder

prusaprinters

<p>I really like the spool holder design by Webberen (referenced). I decided to use his design for my Airtight Filament Canister thing. I needed to add non skid pads to the cradle so it doesn't move inside the canister so I remixed the original design. While I was remixing it, I added a different bearing mount post with a spring split post which allows the bearing to pop on and is also a bit tolerant of an under size or over size post. I added some retro holes on the sides for fun and the pads for optional rubber feet. I also added some faint reference lines to the crossbar to help with spacing the two sides.</p> <p>This cradle design requires only four 608 bearings, it prints quickly, is stable, and adjustable. This cradle can handle spools from 20 mm wide up to 120 mm wide.</p> <p>If you would like an Airtight Filament Canister to keep your filament dry, check out my thing. This spool cradle works with the air tight canister. <a href="https://www.thingiverse.com/thing:1332650">https://www.thingiverse.com/thing:1332650</a></p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>HyperCube</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div> <p><strong>Infill:</strong></p> <p>30%</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>PLA is fine<br/> The cross members should fit the matching holes fine. </p></div></p></p> Category: 3D Printer Accessories