Adjustable Feet / Riser

prusaprinters

32mm Diameter Minimum hight 38mm → adjustable up to 60mm You can use these little riser feet for nearly everything you want. I use them to rise up my filament storeage a little bit to hide some cables underneath it.Quick and easy print. Very stable. I used M5 Heat-Inserts and M5 x 25 Hex-Screws. You can use shorter screws if you don't need the fully hight of 60mm.After printing both parts: Insert M5 Hex Screw into the bottom of the outer part.                                                                      Insert M5 Heat-Insert into the hole of the inner part.I used 2K Epoxy-Resin glue for it. Tipp: For a perfect lineup between both parts, just press or glue in the heat-insert first, then screw the hex screw into the heat-insert. Attach some glue to the screw-head and put the parts together till the screw head reaches the bottom hole of the outer part. Let them rest there till your glue is dry. Finish !To attach the feet to a surface you can use 3m double-sided tape or super glue / 2K Epoxy Printed in wood colored PLA+ 0.2mm Layer hight  3 Perimeters and 20% Gyroid Infill