Adjustable Clamp

prusaprinters

<p>I designed this after trying a similar idea by Chewbugga to support my 3090 graphics card. Unfortunately Chewbugga's design wasn't large enough to suit my PC case.</p><p>After doing an initial design (which was smooth) I realised there might be other uses and added various other designs to cater for different tastes :)</p><p>Instructions:</p><p>Should be generally self explanatory:</p><p>To make a support/clamp:</p><p>Print one Support part.</p><p>Print one Bolt part.</p><p>Bolts should be printed with the head on the plate (FDM)</p><p>Options:</p><p>The joiner allows you to extend the thread by joining two or more together.</p><p>The nuts can be used to lock the thread in position</p><p>The cap fits on the bolts with the hole on the top and makes it easier to wind the clamp up against an object.&nbsp;</p><p>Other info:</p><p>I used PETG but PLA should be fine</p><p>I used various infill settings when testing from 7-15%.</p><p>The tolerance between the bolt threads should be enough for a well calibrated FDM printer.</p>