Adimlab Y Stepper Bracket

prusaprinters

<p>Replacement bracket for the Adimlab printer Y stepper motor. The factory bracket is thin and tends to bend easily. Some folks have even had the mount crack.</p> <p>Use one of the holes on the top side in one of the original spots to put the bracket in the factory original position on the 2020 extrusion. Then use 2-3 screws and extrusion nuts to secure it.</p> <p>Will need longer scews to mount the motor and the Y-axis stop switch. I think M3 x 12mm or will be needed.</p> <p>NOTE: The "Beefy" version doesn't work well with a regular damper. Either don't use one or use a thin material like TPU or gasket making material.</p> <p>UPDATE 2/28/19: Made some edits to the "Beefy" version and ran it through Netfabb.</p> <p>UPDATE 2/3/19: By request of an Adimlab Facebook Group member I have added an extra "Beefy" version.</p> <p>UPDATE 12/2/18: Changed the thickness of the bracket and the triangular brace to 6mm thick. Mine is warping a little bit. Maybe I have my Y tensioner too tight? LOL Now on version 4.</p> <p>UPDATE 10/13/18: Deleted the original STL and uploaded v3 STL of the model. Also modified to give more clearance for the switch.</p> <p>UPDATE 10/12/18: I made some minor changes to the model and installed this bracket on my machine! I used m3x8 screws for the stepper and switch, but I think m3x10 will work a little better with the stepper. I will post the final version after I clean up the mesh some. It will be version 3.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>ADIMLab</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>50%</p></div> <p><strong>Filament:</strong> Hatchbox PLA <br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Need support to print the box section, rest of model needs no support. Suggest Infill 35% or greater. I used 50%. I used PLA, but ABS or PETG should also work very well.</p></div> </p></p> Category: 3D Printer Parts