ADIM Gantry Mod E3DV6 Volcano + Pitan + MGN12 X/Y

thingiverse

This is a set of parts I designed for an ADIM Gantry Pro printer to replace the hotend assembly with an e3dV6 and a geared extruder. It places the nozzle at the same point as the default mount. I ditched the collar with the metal bracket that has the 20pin connector to the mainboard, but this mount will support that hardware if you're using it. You'll need to update the firmware and bridge R1 to get the blower fan working. Parts Required: * Pitan (Printed Titan Extruder) https://www.thingiverse.com/thing:2728600 * E3DV6 Volcano Hotend assembly * 2X 24V 4010 blowers * 4X M2 screws for the blower mounts * 2X M5 nuts to capture in the mount I used a volcano hotend because I got one as a free gift with a kit I ordered and the big ol nozzle seems like a good fit for the ADIM Gantry Pro's large build volume. If you switch to a volcano, the main difference is that the temp on the extruder can be set to about 15C lower than with a normal hotend. It wants more retraction than a normal all metal hotend, I went from 1mm on the normal block to 4mm of retraction on this. I really like being able to print PETG at 205C, it comes out amazingly and gets good adherence to previous layers. Update ---------- ## Y (Bed) MGN12 upgrade I replaced the two 2020 vslot rails with one central 2040 rail and turned the bed sideways to place the support for the bed at a more advantageous angle. # Hardware Required: * 400mm MGN12 linear rail With Mounting T-Nuts and screws * GT2 Belt * M5 25mm * 3X Toothed M5 pulley * 8 X M4 T-Nuts * 1 X 500mm 2040 Vslot ## X Carriage MGN12 ESP32-Cam Illuminator upgrade * 400mm MGN12 Linear Rail with mounting hardware * E3DV6 Volcano Hotend * Titan (or Pitan) Geared Extruder * Bullseye part cooler with 4010 Blower Fan * ESP32-Cam with (Printed Case)[https://www.thingiverse.com/thing:3815069]