Adatper for Shimano 600 EX Arabesque Headset to 36mm Wrench
thingiverse
Adapter for Shimano 600 EX Arabesque Headsets to 36 mm open-end wrench. You need to print this adapter twice to be able to properly tighten the headset. Therefore, you also need two 36 mm wrenches. I do not recommend using pliers as there is a higher risk of slipping and breaking the printed apart. Each adapter is 7 mm (approx. 1/4 inch) high. You should check before printing whether there is enough clearance, especially at the lower nut (i.e. the one connected to the bearing shell). If not, scale down z-height of the adapter before printing. Note: The fitment of this adapter is not perfect. But it was good enough for me.
With this file you will be able to print Adatper for Shimano 600 EX Arabesque Headset to 36mm Wrench with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Adatper for Shimano 600 EX Arabesque Headset to 36mm Wrench.