ADAPTOR 3/4x10 to 1x8 TPI + 3/4x10 TPI to M33x3,5mm

cults3d

Hello, EDIT 14/02: Here is also available the 3/4x10 TPI to M33x3,5mm adapter... Once again in the tooling/do-it-yourself series, I propose (for owners of a rotating tailstock with a thread) a ring or adapter with a "pitch" of 3/4x10 TPI to 1x8 TPI. In my case the idea being to be able to mount my chuck or other accessories on my ONEWAY tailstock. IMPORTANT MESSAGE: This is a second point of support for a part already clamped in a chuck or other platen on the spindle side of the lathe. UNDER NO CIRCUMSTANCES SHALL THIS ADAPTER BE USED WITH A HANDLEBAR ON THE NINTH SPINDLE (engine output) I CANNOT BE HELD RESPONSIBLE IF YOU USE IT IN THIS DIRECTION. There you have it. This adapter is useful (with chuck on the counter-point) to relieve a delicate part or one that tends to vibrate, simply as a reinforcement of sorts. You would think that mounted on the spindle side, the adapter would not withstand the stress and strain caused by the chuck during rotation while working a piece of wood. It could literally explode and serious damage could be done to you. Keep this in mind. In any case, the possibilities of taking parts are really more many with this solution. I also noticed that some companies had this accessory... But hey, no more need to order on the web as long as you can get it yourself ;) LTDO