stlfinder - 3d models search engine stlfinder - 3d models search engine
Adapter to take 3.3 volts from the expansion port (WiFi-Port) of the Prusa Buddy Board

Adapter to take 3.3 volts from the expansion port (WiFi-Port) of the Prusa Buddy Board

prusaprinters

<p>Print the adapter. Remove 2 pins from a pcb header connector and solder two wires to it. One for ground (GND) and one for voltage (VCC). Insert the wires into the holes on the top of the adapter. GND and VCC are marked on the sides of the adapter. Cut the pins at the output of the adapter. You now have 3.3V at your disposal.</p><p><br>Although I have used this adapter myself, I disclaim any responsibility for any damage caused to the board.</p>

Download Model from prusaprinters

With this file you will be able to print Adapter to take 3.3 volts from the expansion port (WiFi-Port) of the Prusa Buddy Board with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Adapter to take 3.3 volts from the expansion port (WiFi-Port) of the Prusa Buddy Board.