Adapter for Laser Tree to fit on XTool D1 Non Pro

thingiverse

This is an adapter so you can mount a Laser Tree K20/K30 onto your XTool D1 NON-PRO laser engraver gantry. This part is only meant to be used as a temporary fix until you can get a metal one from Laser Tree.***Contact Laser Tree and they can supply you with a machine aluminum version of this which will hold up over time.How to use this:Remove your old XTool D1 Non-Pro moduleSlide the Included Laser Tree mounting bracket onto the 3D Printed adapterUsing some very small wood screws, screw the Laser Tree bracket onto this adapter plate. The screw heads will need to be very flush with the bracket for the Laser Tree Module to slide freely. OR use super glue and glue the Laser Tree Bracket onto the 3D Printed adapter plate. Slide the 3D Printed Adapter onto your XTool Gantry, and lock in place. Then slide your Laser Tree Module onto the Laser Tree mounting plate and adjust Z Height/Focus how you need. Be CAREFUL NOT TO OVER-TIGHTEN OR YOU WILL CRACK THE 3D PRINTED PLASTIC PART!!