Adapter for CPU fan to 120mm case fan

thingiverse

I had an old Intel CPU fan lying around so I decided to use it as a case fan. Inspired by this adapter https://www.thingiverse.com/thing:4138132, but I didn't want to break mine, so I came up with the first version of the adapter (picture 3), and before printing it, I thought I could design another model that used less material (picture 4). I only printed the second version, but the first should work just as well since I used the same measurements, maybe also stronger. Specs : - size: 120mm x 120mm x 29mm - designed for a DTC-AAL03 fan, which is quite outdated - thread is M5x0.8; you can print the small test cylinder to check before printing the whole thing - hotend temp: 200°C - bed temp: 50°C If you found this useful, please post your makes or even donate if you feel like it. Thanks! Enjoy! ---------- I had an old Intel CPU fan lying around so I decided to use it as a case fan. Inspired by this adapter https://www.thingiverse.com/thing:4138132 but I didn't want to break mine, so I came up with the first version of the adapter (picture 3), and before printing it, I thought I could design another model that used less material (picture 4). I only printed the second version, but the first should work just as well since I used the same measurements, maybe also stronger. Specs: - size: 120mm x 120mm x 29mm - designed for a DTC-AAL03 fan which is quite outdated - thread is M5x0.8 you can print the small test cylinder to check before printing the whole thing - hotend temp: 200°C - bed temp: 50°C If you found this useful, please post your makes or even donate if you feel like it. Thanks! Enjoy!