Adapter for Carrera Digital 143 Control Unit Conversion

prusaprinters

<p>You want to use your Carrera Digital 143 with 4 to 6 cars and all other features from Digital 132/124 then converting a CU is the first step!<br>I broke up the adapter into 3 parts as it was too big to fit on my build plate. One screw did not go in at the end as there is a slight offset but it was good enough to use it and I did not spend any further time. If that's an issue for you, please go ahead and improve it (and give me a shout).<br><br>Basic Instructions:</p><ol><li>Print out all 3 parts (1, 2 and bottom)</li><li>Detach road and bottom plate from original CU</li><li>De-solder contacts from road</li><li>Screw on part 1 and 2</li><li>Solder new start/road from Carrera Digital 143</li><li>Screw on bottom part.<br><br>Don't forget to also convert the controllers, they need a RJ-11 jack and some sanding to fit into the CU. I'm sure you can find some instructions online.<br><br>&nbsp;</li></ol>