Adaptation Z272 or 300 mm - for LAL reinforcements and 400 mm T8 rods

cults3d

Adaptations of DAL reinforcements for 400 mm long trapezoidal rods These reinforcements created by David Dal (LIAR) are here: https://www.thingiverse.com/thing:1200492 I used the 400 mm trapezoidal rods recommended here (but without cutting them): https://www.thingiverse.com/thing:2748114 with these carts: https://www.thingiverse.com/thing:2627287 and with this face: https://www.thingiverse.com/thing:2516545 Four Z rods of 8 mm diameter and length 445 mm were then required to use the full stroke allowed by the 400 mm trapezoidal rods. I assembled these two pieces, whose stl are available here, using 2 rods diam 8 mm length 460 mm positioned diagonally. The assembly is tightened by 6 M3 nuts and 6 M3 screws 20 mm long. <This adaptation then allows a total Z-travel of 272 mm with a heating plate, and without a heating plate a travel of 300 mm is achievable.