Adafruit Feather - Wearable Case
thingiverse
This case was originally made for a wearable motion capture system based on Adafruit HUZZAH32 and a 9-DoF IMU device. However, it supports most of Adafruit Feather boards. This case requires: - Two M2.5 nuts and two 2,5*8 screws. - Male/Female Short Headers for Feather boards (https://www.adafruit.com/product/2940 and https://www.adafruit.com/product/3002) - Adafruit's Breadboard-friendly SPDT Slide Switch (https://www.adafruit.com/product/805) - 200-400x20 mm Strap (e.g. Velcro strap - https://www.amazon.es/gp/product/B07WQ2RJ74/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1) Also, the original device includes: - Adafruit HUZZAH32 Feather board (https://www.adafruit.com/product/3405) - Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout (https://www.adafruit.com/product/2472) - 3.7V 350 mAh battery (https://www.adafruit.com/product/2750) If the HUZZAH32 Feather and 9-DoF FeatherWing boards are used, solder the slide switch to the pads of the 9-DoF board connected to "EN" and "GND" pins of the HUZZAH32 board.
With this file you will be able to print Adafruit Feather - Wearable Case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Adafruit Feather - Wearable Case.