
Action camera diver's handle #3 - AussieLand edition
youmagine
Update 20180614: v4 is here! https://www.youmagine.com/designs/action-camera-diver-s-handle-4-aussieland-edition That's the third generation underwater camera handle I've created (first gen is here: https://www.youmagine.com/designs/gopro-diver-s-handle , second gen. is here: https://www.youmagine.com/designs/gopro-diver-s-handle-v2). People loved the previous ones too - almost 4,000 downloads so far - but first of all they had GoPro only mounts and required some extra assembly time. This new one is a simplified version and dedicated to my upcoming new Aussie diver friends. Print two pieces from the rod, two pieces from the spikes, and a sole. The sole is a bit big but I could print it by turning the object 45 degrees around the Z axis on my Prusa i3 MK2. The last rendered image explains how to assemble the handle. A 1/4"-20 UNC bolt is fixed to the bottom of the rods with an 1/4"-20 UNC nut pair from underneath. You have to heat up all the other nuts with a blowtorch to fit them to the sole and to the spikes. At the end, you'll have four open 1/4"-20 UNC threads that you can use as mount points for miscellaneous photo gear, such as dive lamps. If you want to leave the camera in the bottom sand for a while - for example, because you need to make a video from very shy sea eels - you can reverse the spikes and screw the rods to the bottom of the sole. The thread in the rod is 7 mm long M18x2.5. Update #20180320: I have uploaded three more "spikes": two with holes for 1/4"-20 UNC threaded inserts, and another one to fit a light using amazing Dinkum FlexiMount joints: https://www.youmagine.com/designs/dinkum-fleximount-1-4-1-5-unc-joint
With this file you will be able to print Action camera diver's handle #3 - AussieLand edition with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Action camera diver's handle #3 - AussieLand edition.