Acrylic Door Hinge

prusaprinters

<p>Designed this for my 3mm Acrylic door for my printer enclosure. The fittings are friction fitted and so your results may vary depending on the accuracy of your printer. If the top hinges are not tight enough and slip out it will break the bottom post for the hinge mount.</p><p>The drill holes are designed to have a flush fit with standard 12mm countersunk wood screws as my enclosure is an old set of desk drawers.</p><p>“Btm_Hinge_Male.stl" has a hole in the post for a standard 12mm countersunk wood screw to drill into, this makes it a lot stronger to prevent it snapping should your top hinges slip.</p><p>“Top_Hinge_Male.stl” can be used for both the short and tall versions, I like to use the short hinges for mid way up the acrylic to support it in the middle, and the long one for the top.</p><p>There is 6mm options available also if you have thicker acrylic.</p><p>Printing:</p><p>15% Infill, I used 0.15 layer height for a more aesthetic look. No supports needed.</p>