Acrobrat accessories w/ dual camera mount

thingiverse

I've designed two mount accessories for the AcroBrat 3" frame to shield the CRSF T-Antenna and my dual-camera setup. These mounts will also work with single cameras and FrSky R9 antennas. Follow me on Instagram at www.instagram.com/madxfpv, where I post pics and videos of my designs. The front camera mount provides multiple layers of protection for your AcroBrat: First, it shields the split camera (Caddx/Runcam Hybrid, etc.), which is not well-protected by the frame itself. Second, it protects the frame itself by overlapping the sidewalls of AcroBrat's frame and adding chin protection to the bottom plate. The tail mount guides the VTX antenna and holds the radio T-Antenna away from props. To print these parts, use a 0.4 mm nozzle, 30-40% infill or more, low-speed, and TPU material. Adjust your support material settings in your slicer to ensure good lamination. **Attention!** You cannot print these parts with rigid filaments (PET, PLA, etc.) as they are designed to bend and be cut for inserting wires or tie-wraps. Use a paper-knife to reach the openings and carefully handle your hands while making the cuts. First, print it with care, especially the front mount which requires support material. Once you get it right, it will be worth it. After printing, make sure the surfaces are well-laminated and don't break apart easily before installing them onto the frame. Try to stretch them to check their performance. The tail mount has space for adding tie-wraps to add posture strength to your T-Antenna (see pics). Tie them to the mount and use a heat-shrink tube to pair them with the Antenna. This way you will avoid damaging your radio antenna by blending in the props. If you liked it and made your AcroBrat look cool, post a make. It will motivate me to continue developing accessories for this frame. Enjoy!