Acer X213H desk stand

prusaprinters

<p>Print all the parts, I used PETG. 2 StandArms are required</p><p>Will require 2 M5x16 socket head screws, washer and nut sets for the pivot.</p><p>Will require 4 M4x8 button head screws for the monitor mount.</p><p>Press the M5 nuts into the stand arms.</p><p>Press the stand arms into the stand base, make sure the nuts are on the inside of the base, facing each other.</p><p>Press the mounts into the back of the monitor, screw them in with the M4 screws.</p><p>Put the washer on the M5 socket head screw, insert one into each mount and into the stand arms, make sure the stand base is oriented with the longer section towards the front of the monitor. Tighten until they are snug, but don't overtighten.</p><p>&nbsp;</p>