[Accessory] - DustShoe V5.0 - RSCNC32 - Ø65mm

thingiverse

https://youtu.be/UOap4unAGRc Dust_Shoe_HT.V5.2 for RSCNC32 needed 14 neodymes 6mm diameter and 3mm thick Plastique transparent ep. 1mm Dust_Shoe_HT.V5.2 for the excellent RS-CNC32 - reviewed and corrected by HTheatre - a huge thank you to him! https://www.makerfr.com/ the version 1.0 is here: https://www.norwegiancreations.com/2014/08/an-open-source-cnc-dust-shoe/ with deflector to contain the drill's airflow - air is evacuated towards the front this version allows for easy tool change, we can use the small magnetic flap on the side to access the spindle nut with a 13mm extra plate key the removable part allows for easy tool change with a 22mm pipe wrench (for Katsu) and for precise probing. works well with 1mm thick plastic and a 20° angle you need to place the "skirt_fastening_clip" flush with the top of the removable part "skirt_support", then insert the plastic skirt, clip the clip, and place it flush with the bottom - no glue needed, everything is adjustable. for printing, I've added the 3MF files, works well with PrusaSlicer, you'll find all my settings and especially the minimum support zones there. -you will need 14 neodymium magnets, diameter 6mm, thickness 3mm https://s.click.aliexpress.com/e/_s8bUJk -a 32mm tube for the aspiration system: https://fr.aliexpress.com/item/32965510263.html?spm=a2g0s.9042311.0.0.27426c37HO5zo0 -a transparent plastic sheet, 1mm thick this one in 60x40mm: https://s.click.aliexpress.com/e/_dWULzOb -an extra-plate key of 13mm to block the spindle: https://amzn.to/2yiNmXy -a pipe wrench: https://amzn.to/2Vb6Bvk support for pipe wrench: https://www.thingiverse.com/thing:4069295