accessories for Bathtub U-Boat by Skimbal

thingiverse

Newly printed the colossal bathtub submarine by Skimbal (http://www.thingiverse.com/thing:6432), I realized that no one had created its missing details. So, I decided to create those myself. In this download, you will find the FWD and AFT dive panels/rudder, the propeller, the periscopes, and the cannons. To install these, you'll need a little bit of glue and some sanding. For the rudder, attach U-Boot-Ruder-FWD.stl to the three front hull holes, both left and right. Print 2 copies each of U-Boot-Propeller.stl and U-Boot-Ruder-AFT-Dive.stl (with possible support for overhangs). Slot/hole these props into the boat's back. The guns can be printed in one piece with support, using either U-Boat_0-Gun_Complete.stl or U-Boat_2-GunSmall-Complete.stl; however, printing them flat and gluing them together might be easier. Similarly, for the periscope/antenna, print each part separately and glue them later. Lastly, I created a stand for the boat by printing 2x U-Boot-Stand-1.stl and 2x U-Boot-Stand-2.stl and sticking/gluing them together.