
AC/DC converter enables LED lights to 48 watts to be run from wall outlet
grabcad
https://www.larsonelectronics.com/product/45190/ac-dc-converter-enables-led-lights-to-48-watts-to-be-run-from-wall-outletThe Larson Electronics DCP-5-DP Waterproof Power Supply converts commonly used 100-277VAC electrical current to 12VDC @5 Amps. This converter includes a typical straight blade plug on the input end and a 2 prong Deutsch connector on the output end. This converter operates with common voltages within the 100-277VAC range and converts it to 12VDC, allowing users to use standard AC power to operate equipment like our LED light bars and HID Golights that require 12 Volts DC. The DCP-5-DP 48 watt power converter provides a safe and effective way for users to tap into and utilize 100-277 Volt AC power sources and convert this current to 12 Volts DC for use with equipment that requires 12 volt electrical power. This unit can be operated with input current ranging from 100 to 277 VAC and will output 12 Volt DC current at 5 amps or 24 Volt DC at 2.5 amps. This power converter features an IP64 rated waterproof design, making it suitable for indoor or outdoor use and includes integral short circuit and overload protection that will shut down the unit in case of faults and overloads to protect the unit and connected equipment from damage.This converter comes with a straight blade plug on the input lead and a two pin Deutsch connector on the output lead, allowing users to simply plug the unit into a typical wall outlet, then connect any of our 12 volt lights equipped with Deutsch connectors. Most of our 12 volt LED lights and LEDLB, LEDLB-E and LEDP series lights as well as many of our HID units utilize Deutsch connectors, making this unit "plug-n-play" compatible. THIS WILL NOT WORK WITH THE HID GOLIGHT SPOTLIGHTS (GL-3XXXH-X models) The small size and wide input voltage range of this unit make it ideal for operating Larson Electronics LED light bars, Golights and other equipment that requires 12VDC current indoors and anywhere 12 volt DC power is not readily available.Measuring 7 inches long by 2.5 inches wide by 1.5 inches deep, this unit weighs less than one pound and is mounted with two conventional screws via slots that allow removal and repositioning simply by loosening the screws. The DCP-5-DP watt converter features full range, universal AC input capability and can be operated with 100 to 277VAC. The unit converts this AC power input to 12VDC output at 5 amps or 24VDC output at 2.5 amps. IP64 rated, this unit is waterproof and ...
With this file you will be able to print AC/DC converter enables LED lights to 48 watts to be run from wall outlet with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on AC/DC converter enables LED lights to 48 watts to be run from wall outlet.