ABS/PETG Temperature Towers for Layer Heights 0.16, 0.20, 0.25 & 0.32mm / 0.40mm Nozzle Bore Diameter

thingiverse

These temperature towers are designed to work accurately with CURA 2.0.5-BETA's extensions, post processing script. The towers are for 0.16mm, 0.20mm, 0.25mm & 0.32mm layer height settings. The temperature range is customized for the ABS/PETG filaments. Hope yours are also in the same temperature range. The physical look and feel is taken from CURA's Extensions >Part for calibration >Add a retract tower. As I could not get an accurate change layer due to usage of different layer height, I decided to create some temperature towers for the 0.40mm nozzle that I am using. The temperature change starts from the base of each bridge column and changes to the next temperature setting once it has printed the bridge, thus the exact stable temperature is used to print that segment and the bridge. Though I am using a DELTA to do some test prints, these towers should work with other printer brands and models. <B>I AM SHIFTING TO PRINTABLES.COM ...gradually as this site seems to ghost all the time</b> For TPU temperature marking range (215-235C), please click here: https://www.printables.com/model/303623-temperature-tower-simple-for-tpu-filament-205c-235