A custom skirt for the SWH170 (kermit)
thingiverse
Here is the revised text: Customized USB connector mounting holes and reduced wire cutouts for improved design. New camera angle allows for a twenty-degree tilt. Rear mount for flight control system, specifically designed to pair with Foxeer XAT650M cameras (http://www.surveilzone.com/dc5v-22v-17-17mm-super-mini-600tvl-sony-super-had-ccd-super-fpv-camera) and RMRC DoDo flight control units. Tested versions available for TornadoFC (flight control unit mounted at bottom, power distribution board on top). Version update released April 3rd 2016 specifically designed to support beerotor f3 systems featuring integrated XT60 connector. Printing Details Printer Manufacturer: RepRap Printer Model: Prusa AIR Use Rafts: No Infill Rate: 40% Resolution: 0.1mm Supports: None Use Supports with rafts no ABS Printing settings are the following, nozzle - 0.4 Layer thickness - 0.1 mm Temperature settings First layer printing temperature is set to 260 degrees Celsius Following layers printed at a temperature of 210C. Required settings to have successful brims printing support material must be included. Post Processing Requirements Supports will need to be manually removed after part has finished printing. Using an drill and a thread for threading in screws and nuts that are 3mm in size.
With this file you will be able to print A custom skirt for the SWH170 (kermit) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on A custom skirt for the SWH170 (kermit).