
A better Lock & Lock Filament Dehydrator
prusaprinters
<p>This is my filament dehydrator. There was no dehydrator on thingiverse which matched my needs so I made my own one.</p> <p>THINGS YOU NEED</p> <p>1x Lock & Lock HSM948H like this: <a href="https://www.amazon.de/gp/product/B004J18IAA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1&tag=thingiverse09-20">https://www.amazon.de/gp/product/B004J18IAA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a></p> <p>Bottom:</p> <p>4x M4 8mm - 12mm screw (over 8mm or under 12mm ;) )</p> <p>1x M4 30mm (for the middle to hold the spool holder)</p> <p>2x 608 (ZZ) bearings, should be ones with low friction for easy twisting of the spool</p> <p>Stand:</p> <p>2x M4 30mm screw</p> <p>2x M4 20mm screw</p> <p>And some 100g of silica gel. I would prefer the orange one which goes green if its soaked.</p> <p>For the feeder I used this: <a href="https://www.thingiverse.com/thing:2116535">https://www.thingiverse.com/thing:2116535</a> but feel free to use what you want. Insert the M10 PTFE coupler, then warm it up with a heat gun and press it to the Lock & Lock for a good fit, let it cool down, drill the holes and you are good to go.</p> <p>The Spool holder is made for 52mm spools and up to 1kg.</p> <p>ATTENTION KIDS:</p> <p>The Spool Holder is made to press fit the 608 bearings, depending on your printers accuracy you probably need to sand it down a LITTLE BIT if the bearings don't fit in. I made a 608 bearing press fit tool so you can GENTLY(!!!!!!!) hammer them in ;)</p> <p>The adapter is here: <a href="https://www.thingiverse.com/thing:3830407">https://www.thingiverse.com/thing:3830407</a></p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div> <p><strong>Resolution:</strong></p> <p>0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div> <p><strong>Filament:</strong> Das Filament PLA</p> </p></p></p> Category: 3D Printer Accessories
With this file you will be able to print A better Lock & Lock Filament Dehydrator with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on A better Lock & Lock Filament Dehydrator.