A - Ammo Clip for Sliding Legolini Repeating Mini Bow

thingiverse

<b>Thingiverse Fails Me!</b> I'm furious! I didn't delete any files from my Sliding Legolini project. The project site was blocked/removed without any warning or message on 2020.05.21. To prevent this from happening again, I uploaded the Sliding Legolini project to my website https://legolini.com. --- This is a custom ammo clip for [Sliding Legolini](https://legolini.com) pump-action repeating mini bow. If you like this project and appreciate my work, consider supporting me through [PayPal](https://www.paypal.me/lukaszjanikowski). This Version "A" without a circle on the housing is designed for 160 mm bolts with steel point heads, aluminum shafts (6.2 mm diameter) with plastic fletching or full plastic shafts (6 mm diameter), and fletching. The cheapest bolts are also available on Aliexpress. Ammo clip dimensions: 85x53x30.8 mm If you have other bolts than the ones shown in the first photo, check out version B or C. --- I think this [video](https://youtu.be/hbBHbEoSbZ0) will explain how it works. When loading the magazine, tilt the bow back about 15-45 degrees. The rest is done by gravity when the ammo clip moves backwards. With a little practice, you can load a magazine very quickly. This is a latch triggered by the movement of the clip backwards. At the end of the bow magazine, there's a small notch that works with the ammo clip main slider. Ammo clips have a small lock switch that makes it difficult to accidentally unload the ammo clip when placing it in the belt mount. The trouser belt mount has an additional lock that immobilizes the whole mechanism, so when walking or running the bolts won't fall out. Belt attachments are available for different belt sizes. Choose the right attachment for your belt. Belt attachments are compatible with other versions of ammo clips. --- This ammo clip is 3D printed (9 parts) and requires only 4 external elements to work: * 3 pieces M3x20 mm Allen screws * Small spring from a pen - 4.2 mm diameter and about 25 mm length The second photo shows the recommended orientation of the elements when printing. Walls thickness: 1.2mm, Layer height: 0.2mm, Infill: 25-30%. After printing, it's absolutely necessary to sand and smooth all print surfaces. Without sanding this ammo clip may not work correctly! Use precision files and sandpaper to remove any blobs or overflow of filament. The most important are the upper surfaces of prints and all mechanism parts. The order of assembly is shown in the pictures. --- 2020-06-16 I added an STL file called "optional_ammo_holder+2mm". Users reported that their arrows had a different dimension of fletching and the back of the arrow. If your arrow has a dimension from the beginning of fletching to the end of the arrow 56-58 mm, print "optional_ammo_holder+2mm" instead of "ammo_holder". ---