9mm Remix case feeder with mods

thingiverse

I've spent over a month building the original 223/308 design and making a 9mm conversion kit for it and spending a lot of time testing out my designs. included is a newly designed 9mm wheel and appropriate core. This wheel is designed to be used with the recessed pocket side facing up (not the smooth side) to aid in constantly moving brass around. l also Improved Case feeder drop tube that works with 9mm, 223, 308. This has a improved location for photocell and led so if a case jam happens, it stops the motor within 2 shells before they back up. A viewing port that allows a simple paperclip or zip tie to be inserted to lift cases and adjust in the unlikely situation of a jam and they drop free. The new drop tube will snap right onto the dillon clear case feeder tube. I also was able to utilize the original dillon s bent case feeder support pipe to hold this case feeder. basically you have to drill 2 new holes in the metal tubing aprox 3/8" above the original holes and a slight rotation. I found it easiest to sit the case feeder and new drop tube on the pipe, position it over the clear tube for alignment and mark the new holes on the pipe. I used a 12 volt 2 rpm motor this and it works excellent. 6 and 10 rpm was too fast. I print in petg at 250ø 60 deg bed. (use a brim on the drop tube upside down no supports) hopefully I can add more pics etc after I publish. Huge thank you to GZCWNK for all his original work because his designs got me building mine and its running fantastic only dillon 750xl One video shows how easy it is to clear a jam.. (this was a unfinished design so it’s ugly) https://youtu.be/lwwFqlW2SHw https://youtu.be/5mzCSuXCKXQ https://youtu.be/xNj-WRlH_eY