90 deg lean corner for 11mm x 11mm timber

thingiverse

Affixing screws in 11mm x 11mm timber often results in splits when there's little stress, but frames can be supported by another structure, allowing these angles to be fixed to the timbers with cable ties and a staple. To achieve a secure fit, follow these instructions: Place screw anchors flush with upright or bearing timbers. Mark screw anchor holes clearly. Drill holes accurately before fastening screws securely. Cut a groove between screw holes on the outside of timber carefully, but it's optional. Secure cables through holes with sturdy cable ties quickly and easily. Align second timbers flush with the outside of first timbers. Repeat previous steps by marking, drilling, and securing additional cables. Add extra reinforcement by cutting a groove between screws carefully again if needed. Tighten cable ties securely to maintain structural integrity. Staples securely tie two timbers together effectively. To ensure long-lasting stability, complete these procedures for every corner.