9.1L Open-Frame ATX SFF PC Case
thingiverse
All of my previous PC case designs have been for ITX, but with every design I have been asked if it can work with ATX/microATX. This was mostly due to the maximum print size on many printers, so I challenged myself to create a case almost anyone could print that would be compatible with all motherboards. .32mm Layer Height 3 outer layers 3 top/bottom layers 20% infill (I used cubic infill) No supports Requires roughly 200x200x130mm build volume. If you wanted to go just ITX you could chop several of the pieces and get under 150mm, and if 130mm build height is an issue you can put the PSU parts on their side with supports. ITX and DTX boards need two MB bars, all others need at least three. There is a center support beam slot if you want additional support. Power Switch: https://ebay.us/zTCEuE Standoffs: https://ebay.us/AwwNCX Video: https://youtu.be/IR4NWpqXP5c
With this file you will be able to print 9.1L Open-Frame ATX SFF PC Case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 9.1L Open-Frame ATX SFF PC Case.