8x8x8 LED Cube Case

thingiverse

This is an alternate case design for the Geekreit 8x8x8 LED cube display, available from banggood (https://www.banggood.com/Geekcreit-8x8x8-LED-Cube-3D-Light-Square-Blue-LED-Flash-Electronic-DIY-Kit-p-1055438.html) This design differs in that you don't need to disassemble and part-desolder the LED array before assembling the case, making adjustments and repairs much easier. Also included is an 8x8 LED positioning jig so you can get your LEDs positioned just right. See the pictures for an in-use example. _SCAD files are included_, allowing you to tweak things like the shape of the power button cut-out, etc. ## Tips * Once all the LEDs are soldered into the jig, you'll need to flex/warp the jig back and forth to slowly release the LEDs * The SCAD file was cleaned up a little after printing the case as displayed. Everything aligned up in the resulting model, but there's a chance something might not come out right. * The screw holes are intended to be used with M3 screws. The upper portion of the post will need to be tapped. Alternately, self-tapping screws should work well too. The ID of the upper post is a bit smaller than M3 for either purpose. * No extra space has been made between mating components. This turned out okay, but I suggest you check your extrusion factor and avoid any significant over-extrusion. * I have no idea why the last bullet point is bolded.