8 Port LED Distro MTM AC30C-11 mount
thingiverse
This is the stuff needed to mount the 8 Port LED Distro and a PSU into a MTM AC30C-11 case.You can purchase the 8 Port LED Distro in our Tindie store.Print 1 AC30C-11_PSU_mount_backPrint 1 AC30C-11_PSU_mount_frontPrint 2 8_Port_LED_Distro_PSU_mountPrint 1 AC30C-11_hole_drill_guideUse the following screws to mount to your power supply.4 x M3x6mm Hexagon socket button head screws (ISO 7380-1)8 x M4x10mm Hexagon socket button head screws (ISO 7380-1)Use the following glands and drills to make holes for the power, ethernet, and output cables.8 x PG7 glands1 x PG9 gland1 x RJ45 Waterproof Connector - https://www.amazon.com/dp/B08CDD2BRF1/16" drill bit1/2" Forstner bit for PG75/8" Forstner bit for PG93/4" Forstner bit for RJ45OR a metric step bit with the following sizes:12mm for PG715mm for PG920mm for RJ45The 3/4" Forstner is a little small for the RJ45 Waterproof Connector. You can use a knife to make the hole a little bigger.Tape the hole drill guide to the back of the MTM AC30C-11 underneath the hinge. Use the 1/16" drill and mark the location of each hole. Use a larger bits to drill the correct sized hole.You can get pigtail cables here: https://www.wiredwatts.com/wire
With this file you will be able to print 8 Port LED Distro MTM AC30C-11 mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 8 Port LED Distro MTM AC30C-11 mount.