8 Liter ITX Gaming PC Case

thingiverse

The most up-to-date version is available on Cults3D for $4. It features sleeker side panels, a 47mm CPU cooler height for the blackridge, and other enhancements. By purchasing this updated model, you'll also be supporting me. Thank you. https://cults3d.com/en/3d-model/gadget/itx-gaming-pc-case-banditochinchilla49 This is an improved version of one I have successfully printed. It boasts better design and functionality compared to its predecessor. Everything is printable on an Ender 3. The longest length is 201mm. Longer components are split, but securely held in place by other parts. Here's what the case supports: - A 300mm GPU length, 130mm GPU height, dual slot width - A 45mm CPU cooler height - ITX motherboards only - SFX power supply only - One 2.5" drive (mounted to the front panel) - Two 92mm SLIM fans on the bottom (intake) The footprint is 122 mm x 318 mm, with a height of 201 mm without feet (7.79 Liters). I used PETG for everything. I've noticed no serious warping or drifting after several months. However, use PLA at your own risk! Side panels are okay, though. You'll also need the following components: - A $35 30cm PCIe Riser - A $10 M3 nuts and bolts set - A $10 16mm Power button - A $5 2 ft Power cable You should be able to spend less than $100 for these items plus filament. Comparable cases like the Dan A4 SFX run +$200 (although they are made of metal). If you don't purchase the same components I did, you may encounter issues. You can try to correct them with the included step file. A text file containing assembly instructions and a list of parts is also included. Everything is secured via captive nuts. Hand tightening should be sufficient; avoid over-tightening, as it can risk damaging the case or your components. You should be able to build a fully functional skeleton using less than 400 grams of filament (3 walls & top/bottom layers, 20% infill), with the side and top panels adding another ~300 grams. You shouldn't need more than 1 kg of filament. Here are some examples of what you can make: [The OG](https://www.reddit.com/r/sffpc/comments/h9mevr/3d_printed_8_liter_mitx_pc_case_dan_a4_clone/) [Metal side panels](https://www.reddit.com/r/sffpc/comments/hglshe/i_printed_udito49s_design_with_a_few_modifications/) [Custom side panels](https://www.reddit.com/r/sffpc/comments/hsuz1i/first_sffpc_build_3d_printed_case/)