.75" bracket modules for shelving system

thingiverse

This object is designed using a customizer on the Thingiverse platform. The design can be modified to suit different needs. Instructions are provided below. The design has the following features: - A hole for a bracket that connects two parts, positioned at an angle of 90 degrees. - Ground offset distance is set to 16 units. - Foot width is adjusted to 30 units. - The back parts can be removed from the design by setting their number to zero. - This design represents the lower part and it does not resemble the bottom piece. Edges of this part have been smoothed out to a radius of seven units. - Two connector bars are used, providing more support to the overall structure. - A bracket holder with a depth of 20 units is provided at the top for easy attachment to a plate or another surface. - Straight bar connections start from the bottom and do not stop halfway through. - Board size of this piece has been reduced to three units. A uniform thickness of two units throughout gives it structural stability. The board width has also been adjusted to match other parts, keeping the total structure aligned properly. Notch length is at 35 units for improved balance. - All connectors, including those from back sides of the structure, have a hole diameter of three units each. - Notches created on this design are deep, reaching as much as 30 units inside its body. Total thickness of the material is 19 units and board insertion slots provide space with enough room for the required materials to be fitted in easily.