7" Waveshare LCD Enclosure and Mount

thingiverse

This enclosure is specifically designed to house the 7" Waveshare 1024x600 HDMI capacitive touch LCD screen v2.1, intended for use with a 3D printer that utilizes OctoPrint and the TouchUI plugin. The mount assembly leaves much to be desired, but the enclosure itself stands on its own merits, providing a magnetic anchor to keep the LCD in place without compromising user interaction. The plan is to attach the LCD to a Pi via HDMI and USB cables, allowing for seamless portability and effortless repositioning of the screen as needed. The bezels on either side are intentionally designed with ample size to facilitate a secure grip without interfering with touchscreen functionality. For cable management, it's recommended to use right-angle connectors to route them through the back of the enclosure. To achieve optimal results, consider incorporating an HDMI 270-degree adapter paired with an Ultraslim HDMI cable and micro USB down angle cable. Additionally, automatic backlight control can be implemented via a one-wire mod for enhanced user experience. Print Settings: Printer: C-Bot Rafts: No Supports: No Resolution: 0.3mm Infill: Irrelevant Notes: Utilize gap fill to solidify the walls and ensure structural integrity. Post-Printing: Secure the assembly using #4-20 3/8" plastite screws from the back side, or alternatively, #4 3/8" wood screws may be used. The back holes are designed for clearance, so drill them with a 1/8" or 3mm or 3.5mm bit. For added versatility, M3-0.5 machine screws can also be employed if all the holes are drilled through; however, this will result in visible screw heads or nuts. The slot in the back of the case is intended for a ferrous metal piece to be glued in place, serving as an attachment point for the magnet. The magnet recess in the mount is tailored for a 1/4" / 6mm x1/16" / 1.6mm disc magnet; however, this particular mount design is subpar, and alternative solutions are welcome.