7" Touchscreen Case for Raspbery Pi

thingiverse

Here is my case design for the 7" touchscreen for Raspberry Pi by DFRobot. You can find the touchscreen here: https://bit.ly/2Ven1TB. The case itself is just the part name "back", you can mount it on the stand I designed or use a vesa mount. The case has 4 holes that correspond to a vesa 75 mount. You can add a Raspberry Pi camera module v2 on top using the support and cover. I've also included a 40mm fan opening to cool the raspberry pi from the back. With the 3D printed parts you'll need: DFRobot 7" touchscreen A Raspberry Pi (from B+ to 3B+) or an Asus TinkerBoard A 40mm 5v fan 1 M5x25mm bolt with 2 washers and a wing nut (for the up/down pivot of the stand) 2 M4x10mm bolts 2 M4x35mm bolts (for the vesa mount) 4 M4 nuts 1 M4x8mm 1 M4 nut (for the pivot)