7" LCD stand with a Raspberry Pi and touchscreen

thingiverse

This is a custom design for a Raspberry Pi and 7" touchscreen LCD (18cm diagonal viewable area). If you need alternative dimensions, I suggest checking out my other designs featuring 4.3" and 3.5" LCDs. The specifications for this LCD are as follows: Dimensions: 165mm x 100mm x 7.5mm To assemble this project, you will need M4x20 bolts and nuts for the ribs and approximately M2.5 bolts to secure the Raspberry Pi. Please note that the HDMI connection may appear unsightly; however, I am working on a potential solution to improve its appearance. As an optional feature, you can print the audio component, which includes a PAM8403 PCB (22mm x 22mm) and a small speaker with dimensions of 28mm in diameter and 3mm in height. If you appreciate my designs, I would be grateful if you could treat me to a beer. **Print Settings:** * Printer Brand: RepRap * Printer Model: RepRap NEO * Rafts: No * Supports: No * Resolution: Z-axis resolution of 0.1mm and nozzle diameter of 0.2mm * Infill Density: 15% rectilinear infill pattern * Filament Used: bq PLA (black)