7 Foot Pixel Arch - Pixel
prusaprinters
This is a Heavy Duty mounting bracket for LED Holiday Arch. The Arch is angled to support at 10 Foot 2" HDPE Tube 7 to 8 feet across. Can be used with LED Bullet Pixel or Strips. Materials needed: 2 - 10' HDPE Tubes with 2" OD, 1.75" ID 4 - 25MM M6 Bolts 4 - M6 Nuts 1 - 7or 8' 1/2" EMT Tube 2 - M5 Nuts 2 80MM M5 Bolts To Assemble: Insert 4 nuts into the internal nut holders Insert tube into the mounting bracket Use drill with 5MM bit to drill hole through tube thru the 4 holes. Tighten the bolts together, not one at a time (or you will risk cracking the inner part of the apparatus. Drill 2 holes in the EMT tube 3/4 inch from each end. Attach the cross support on both ends Repeat steps 1-4 for the bracket on the other end. Insert the HDPE tube into 1 mount. Use a drill through the 4 mounting holes Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 40 Filament: Any PETG Any Notes: This can be printed with a 0.8 Nozzle. Slized with 40% Infill & Gyroid pattern.. Category: DIY
With this file you will be able to print 7 Foot Pixel Arch - Pixel with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on 7 Foot Pixel Arch - Pixel.